Metro L3-061 1.0L VIN 6 TBI (1998)
10. Connect the fuel injector electrical connector.
11. Connect the TP sensor electrical connector.
12. Connect the negative battery cable.
Tighten
Tighten the negative battery cable terminal retainer to 5.5 N.m (4 lb ft).
13. Turn ON the ignition in order to pressurize the fuel system.
14. Turn OFF the ignition.
15. Check for fuel leaks.
16. Adjust the accelerator cable. Refer to Accelerator Cable Adjustment.
17. Adjust the TP sensor. Refer to TP Sensor Adjustment.