Metro L3-061 1.0L VIN 6 TBI (1998)
volts.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Tighten the TP sensor screws (1).
Tighten
Tighten the TP sensor screws to 2.0 N.m (18 lb in).
9. Replace the TP sensor if a TP sensor voltage reading of 0.98 to 1.02 volts cannot be obtained. Refer to TP Sensor Replacement.
10. Install the air cleaner. Refer to Air Cleaner Assembly Replacement.