Metro L3-061 1.0L VIN 6 TBI (1998)
Seat Belt: Service and Repair
Front Seat Belt Replacement
2 Door
Description
CAUTION: The seat belt assembly and/or bracket assembly must be replaced as a unit only. Do not substitute parts for any reason, or
personal injury could result.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative (-) battery cable.
2. Remove the following from the front seat:
^
One bolt
^
The washer
^
The spacer
^
The front seat belt buckle (4)
3. Disconnect the electrical connector (5) (left-side buckle).
4. Remove the following components:
^
One front seat belt lower anchor bolt
^
The washers
^
The spacer
5. Open the cover and remove the following components:
^
One front seat belt upper guide loop (I) anchor bolt
^
The washers
^
The spacer
6. Remove the lower rear quarter trim panel. Refer to Body Rear End in Body and Accessories.
7. Remove the following from the vehicle:
^
One screw
^
One front seat belt retractor bolt
^
The washers
^
The front seat belt retractor (2)
4 Door