Metro L3-061 1.0L VIN 6 TBI (1998)
Starter Motor: Service and Repair
Starter Motor Overhaul
Starter Disassembly Procedure
1. Remove the following components from the yoke:
^
Two bolts
^
Two screws
^
The commutator end cover
2. Remove the commutator end bushing and the washers from the yoke.
3. Scribe matchmarks on the yoke and the drive housing to ensure proper assembly.
4. Remove the drive housing from the yoke (3).
5. Remove the pinion drive lever from the drive housing (1).
6. Remove the armature from the yoke.
7. Remove the brush holder (3) from the yoke (2).
8. Remove the brushes (4) from the brush holder.
9. Remove the drive bushing from the armature.