Metro L3-061 1.0L VIN 6 TBI (1998)
5. Lightly grease the pinion drive lever contact points with Lubricate lubricant GM P/N 1050109, or the equivalent.
6. Install the gear shaft assembly with the pinion drive lever (4) to the drive housing (1).
7. Install the pinion drive lever seal (3) and the plate (4) to the drive housing (1).
8. Lightly grease the idle gears with Lubricate lubricant GM P/N 1050109, or the equivalent.
IMPORTANT: Align the notches in the idle gear retainer with the bolt holes in the drive housing.
9. Install the 3 idle gears (3) to the drive housing (1). Secure with the idle gear retainer (2).