Metro L3-061 1.0L VIN 6 TBI (1998)
![background image](/chevrolet/metro/l3-061_1.0l_vin_6_tbi/Page-1351008.png)
15. Install the spring washer (2) and the commutator end cover; secure with 2 bolts and 2 screws.
Tighten
Tighten the commutator end housing bolts to 8 N.m (71 lb in).
16. Install the solenoid.
Starter Cleaning, Inspection and Testing
TOOLS REQUIRED
^
J 544 - 01 Tension Scale
^
d 8001 Dial Indicator
^
J 26900 - 13 Magnetic Base
^
J 26900 - 5 Vernier Caliper
^
J 39200 Digital Multimeter
NOTE: Do not use grease dissolving solvents for cleaning the overrunning clutch or armature. Solvents dissolve the grease packed in the clutch and
damage the armature and the field coil insulation.
1. Clean all starter motor parts.
2. Remove dirt and bum marks from the commutator end (2) of the armature (1) by sanding with a #300 or #400 grit sandpaper. Wipe the parts with
a clean shop cloth.