Metro L3-061 1.0L VIN 6 TBI (1998)
and springs after the vehicle has accumulated some mileage, and non-original tire brand and size can all affect trim height.
INSPECTION
NOTE: Before measuring trim height, perform the following steps; then refer to the specifications shown in the image.
^
Make sure all tires are properly inflated.
^
Remove all extra weight from the vehicle.
^
Bounce the front and rear of the vehicle up and down a few times to stabilize the suspension.
^
Make sure the fuel tank is at least 1/2 full.
^
Securely fasten the spare tire and jack within the rear luggage compartment.
^
Measure the vehicle body-to-ground clearance several times in between bouncing the vehicle's suspension. The true trim height should be an
average of several measurements.
^
Close hood and all doors.
Two Door Hatchback Models:
A: 450 mm (17.75 inch)
B: 450 mm (17.75 inch)
J: 210 mm (8.25 inch)
K: 225 mm (8.85 inch)
Z: 45 mm (1.75 inch)
Four Door Models:
A: 450 mm (17.75 inch)
B: 450 mm (17.75 inch)
J: 210 mm (8.25 inch)
K: 225 mm (8.85 inch)
Z: 45 mm (1.75 inch)