Metro L3-061 1.0L VIN 6 TBI (1998)
![background image](/chevrolet/metro/l3-061_1.0l_vin_6_tbi/Page-1070002.png)
4. Remove the servo cover snap ring (11).
5. Remove the J 35534 after slowly loosening adjustment bolt.
6. Remove the following components:
^
The servo cover (10)
^
The servo piston (7)
^
The springs (4,5)
^
The piston rod (1)
7. Inspect the intermediate servo assembly.
INSTALLATION PROCEDURE
^
Tools Required
-
J 35534 Piston Cover Depressor
-
J 36850 Transjel Transmission Assembly Lubricant
NOTICE: After making sure all parts are clean, liberally apply J 36850 to all servo parts prior to assembly. This serves to prelubricate seals and to
ensure ease of assembly.