Metro L3-061 1.0L VIN 6 TBI (1998)
13. Install the manual selector cover to the selector lever. Secure the cover with 4 screws.
IMPORTANT: After tightening the interlock cable bolt, set the shift selector lever (1) to the P position. Verify that the ignition switch can be
turned from the ACC to the LOCK position and that the ignition key can be removed from the ignition switch. With the shift selector lever in any
position other than P, verify also that the ignition switch CANNOT be turned from the ACC to the LOCK position.
14. Install the manual selector cover illumination lamp bulb socket to the cover.
15. Install the selector lever knob to the selector lever. Secure with 2 screws.
16. Install the rear console into the vehicle.
17. Install the center into the vehicle.
18. Install the 6 screws into the console (1,2,3,4,5,6).