Metro L3-061 1.0L VIN 6 TBI (1998)
6. Apply GM P/N 12346004 or the equivalent to the threaded portion of the transaxle drain plug.
7. Install the transaxle drain plug (2) into the transaxle.
^
Tighten the transaxle drain plug to 21 Nm (15 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
8. Add approximately 2.4 liters (2.5 qts.) of Castrol Syntorq Transmission Fluid, or the equivalent, into the transaxle oil level/filler plug hole.
The oil level should be even with the bottom of the transaxle oil level/filler plug hole.
9. Apply GM P/N 1236004 or the equivalent to the transaxle oil level/filler plug threads.
10. Install the transaxle oil level/filler plug (1) into the transaxle.
^
Tighten the transaxle oil level/filler plug to 21 Nm (115 ft. lbs.).
11. Remove the drain pan from under the transaxle.
12. Lower the vehicle.