Metro L3-061 1.0L VIN 6 TBI (1998)
Shifter M/T: Service and Repair
Gearshift and Select Shaft Assembly - Overhaul
DISASSEMBLY PROCEDURE
1. Remove the 4 bolts from the gearshift guide case (2).
2. Set aside the retaining clamp (1) and the engine wiring harness bracket (3).
3. Remove the gearshift guide case from the transaxle.
4. Raise and suitably support the vehicle.
5. Place a drain pan or another suitable container under the transaxle.
6. Remove the transaxle oil level/filler plug (1) from the transaxle.
7. Remove the transaxle drain plug (2) from the transaxle using a 10-mm hex head socket or wrench.
8. Drain the transaxle oil.