Metro L3-061 1.0L VIN 6 TBI (1998)
Louvers: Service and Repair
Air Deflector Louver Replacement - Center Vent
REMOVAL PROCEDURE
1. Gently pry-out the center vent garnish (4) with a small flat screwdriver.
2. Remove the IP center outlet duct.
3. Remove the 3 screws and the center vent louver (1) from the IP.
INSTALLATION PROCEDURE
1. Install the center vent louver (1) to the IP. Secure the louver with the 3 screws.
2. Install the center vent garnish panel (4) to the IP. Push the panel in until the panel fully engages.
3. Install the IP center outlet duct.
