Metro L3-061 1.0L VIN 6 TBI (1998)
Wiper Arm: Service and Repair
Wiper Arm Replacement
Front
REMOVAL PROCEDURE
IMPORTANT: Observe the location of the wiper arm (2) before you remove the wiper arm. This will ensure correct installation.
1. Remove the nut cover and the retaining nut that secure the wiper arm.
2. Remove the wiper arm (2) from the wiper linkage (3).
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Install the wiper arm (2) to the wiper linkage (3). Secure the wiper arm with the retaining nut.
Tighten
Tighten the wiper arm retaining nut to 20 N.m (15 lb ft).
2. Install the wiper arm nut cover to the wiper arm.
Rear
REMOVAL PROCEDURE
IMPORTANT: Observe the location of the wiper arm. This will ensure correct installation.