Metro L4-079 1.3L VIN 2 MFI (2001)
Suspension Spring ( Coil / Leaf ): Service and Repair
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the control rod-to-knuckle nut (2) and the washer.
4. Remove the control rod (2) from the knuckle stud (1).
5. On ABS equipped vehicles, disconnect the wheel speed sensor electrical connector and remove the sensor harness from the control arm.
6. Remove the stabilizer link from the control arm.
7. Support the suspension arm using a floor jack.