Monte Carlo V6-260 4.3L DSL (1983)
FIGURE 1 - REAR COMPARTMENT WEATHERSTRIP
b)
Apply a bead of 3M 8011 or equivalent into new weatherstrip carrier (Figure 1). Allow to dry until adhesive becomes tacky (approximately
5 minutes).
c)
Install new weatherstrip to flange and allow a minimum of 3 hours before closing lid.
7.
Close lid and retest for water leaks. If water leaks found, apply addition 3M 8011 or equivalent under weatherstrip outer lid.
Labor Operations Number:
T0077
Labor Time :
.6 hour