Monte Carlo V6-3.4L VIN E (2000)
9. 3.4L - Remove the engine block coolant drain plug from the engine left side.
10. 3.4L - Remove the engine block coolant drain plug from the engine right side.
11. 3.8L - Remove both block drains (knock sensors).
Important: Dispose of used coolant in a proper fashion. Never pour used coolant down the drain. Ethylene glycol antifreeze is a very toxic
chemical; disposing of it into the sewer system or ground water is both illegal and ecologically unsound!
12. Allow the coolant to drain completely.
Filling Procedure
Notice: DO NOT use cooling system seal tabs (or similar compounds) unless otherwise instructed. The use of cooling system seal tabs (or similar
compounds) may restrict coolant flow through the passages of the cooling system or the engine components. Restricted coolant flow may cause engine
