Monte Carlo V6-3.5L VIN K Flex Fuel (2006)
Push Rod: Service and Repair
Valve Rocker Arm and Push Rod Replacement
Removal Procedure
Important: Place the valve train components in a rack in order to ensure that the components are installed in the same location from which they were
removed.
1. Remove the valve rocker arm cover(s).
2. Loosen the valve rocker arm bolts.
3. Remove the rocker arms.
4. Remove the pushrods.
^
The intake push rods measure 147.51 mm (5.81 inch).
^
The exhaust push rods measure 154.87 mm (6.1 inch).
Installation Procedure
