Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the front bumper fascia reinforcement.
2. Install the fascia to the vehicle.
3. Install the push-in retainers to the front upper bumper fascia support.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front bumper fascia to lower support screws.
Tighten the front bumper fascia lower support screws to 2 N.m (18 lb in).
5. Install the front bumper fascia to fender nuts.
Tighten the front bumper fascia nuts to 6 N.m (53 lb in).
6. Install the front fender liners.
7. Install the fog lamps, if equipped.
8. Install the headlamps.