Monte Carlo V6-3.8L SC VIN 1 (2004)
9. Install the screws to the front door pull handle.
Tighten
Tighten the screws to the front door pull handle to 3.5 N.m (31 lb in).
10. Install the front door handle trim bezel.
Trim Panel Replacement - Side Front Door (Monte Carlo)
Trim Panel Replacement - Side Front Door (Monte Carlo)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the screw from the upper door trim panel.
2. Remove the screws from the front door pull handle.
3. Remove the front door handle trim bezel.