Monte Carlo V6-3.8L SC VIN 1 (2004)
Arm Rest: Service and Repair
Console Armrest Replacement - Front Floor
Removal Procedure
1. Raise the front floor console armrest.
2. Remove the screws from the console armrest hinge.
3. Remove the console armrest.
Installation Procedure
1. Install the armrest to the hinge at the front floor console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws to console armrest hinge.
Tighten the screws to 2 N.m (18 lb in).
3. Lower the console armrest.