Monte Carlo V6-3.8L SC VIN 1 (2004)
Engine Mount: Service and Repair
Engine Mount Strut Bracket Replacement - Left
Engine Mount Strut Bracket Replacement - Left
Removal Procedure
1. Drain the cooling system.
2. Remove the engine coolant temperature sensor.
3. Remove the engine mount strut at the left engine mount strut bracket.
4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.
Installation Procedure
1. Install the engine mount strut bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount strut bracket bolts.
-
Tighten the engine mount strut bracket bolts to 50 Nm (37 ft. lbs.).