Monte Carlo V6-3.8L SC VIN 1 (2004)
9. Assemble the timing chain on the sprockets with theta timing marks as close together as possible.
10. Install the camshaft sprocket bolt.
10.1. Tighten the bolt to 100 Nm (74 ft. lbs.).
10.2. Use the J 45059 to rotate the bolt an additional 90 degrees.
11. Install the timing chain dampener.
12. Install the timing chain dampener bolt.
-
Tighten the bolt to 22 Nm (16 ft. lbs.).
Important: Rotate the engine two revolutions and check the timing marks. Ensure that the marks are aligned.
13. Install the engine front cover.
