Monte Carlo V6-3.8L SC VIN 1 (2004)
Exhaust Pipe/Muffler Hanger: Service and Repair
Converter Hanger Assembly
Converter Hanger Assembly Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Notice: Refer to Catalytic Converter Movement Notice in Service Precautions.
2. Support the exhaust system
3. Remove the 3-way catalytic converter pipe hangers.
4. Inspect the 3-way catalytic converter brackets for serviceability. Repair or replace as necessary.
Installation Procedure
1. Install the 3-way catalytic converter pipe hangers.
2. Remove the support from the exhaust system and the vehicle.
3. Inspect the exhaust system for underbody contact.
4. Lower the vehicle.