Monte Carlo V6-3.8L SC VIN 1 (2004)
Compressor Clutch: Service and Repair
COMPRESSOR CLUTCH ASSEMBLY REPLACEMENT
TOOLS REQUIRED
-
J 37872 Compressor Clutch Holding Tool
-
J 6083 Snap Ring Pliers
REMOVAL PROCEDURE
1. Remove the compressor.
IMPORTANT: Remove the three adjustable dowels from the J37872 Compressor Clutch Holding Tool.
Install three 5/16 x 1 inch bolts in place of the dowels.
2. Remove and discard the compressor clutch plate bolt.
Use the J 37872 to hold the compressor clutch plate from turning.