Monte Carlo V6-3.8L SC VIN 1 (2004)
22. Install the right air duct to the cross vehicle beam.
23. Install the right air duct bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
24. Install the panel air duct to the cross vehicle beam.
25. Install the panel air duct screw (1).
Tighten
Tighten the screw to 1.8 N.m (16 lb in).
26. Install the panel air duct bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
27. Install the I/P lower trim panel.
28. Install new seal washers on the evaporator tube.
29. Connect the evaporator tube to the TXV.