Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Install new seals washers to the A/C compressor hose assembly and evaporator tube.
6. Install the A/C compressor hose to the evaporator tube.
7. Install the A/C compressor hose to evaporator tube nut.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Install the A/C compressor hose to the condenser.
9. Install the A/C compressor hose nut to the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
10. Install the air cleaner assembly.
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the component using J 39400-A.