Monte Carlo V6-3.8L SC VIN 1 (2004)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector.
3. Disconnect the EVAP canister purge valve purge pipe and vacuum supply hose.
4. Release the retaining tab on the EVAP canister purge mounting bracket and remove the EVAP canister purge valve.
INSTALLATION PROCEDURE
1. Install the EVAP canister purge valve onto the EVAP canister purge valve mounting bracket.
