Monte Carlo V6-3.8L SC VIN 1 (2004)
Throttle Cable/Linkage: Service and Repair
Accelerator Controls Cable Bracket Replacement
ACCELERATOR CONTROLS CABLE BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the cruise control cable from the throttle body lever.
3. Remove the cruise control cable (1) from the bracket (2).
4. Remove accelerator cable from the throttle body lever.
5. Remove the accelerator cable (2) from the bracket (1).
6. Remove the accelerator controls cable bracket bolts.
7. Remove the accelerator controls cable bracket from the throttle body.
INSTALLATION PROCEDURE