Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the TP sensor to the throttle body assembly.
2. Apply thread-locking compound GM P/N 12345493 (Canadian P/N 10953488) or equivalent to the TP sensor screws.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the 2 TP sensor screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
4. Connect the TP sensor electrical connector.
5. Install the fuel injector sight shield.