Monte Carlo V6-3.8L SC VIN 1 (2004)
Seat Belt Buckle: Service and Repair
Seat Belt Replacement - Center Rear
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the nuts (1) from the center rear seat belts.
3. Remove the center rear seat belts from the vehicle.
INSTALLATION PROCEDURE
1. Position the center rear seat belts to the anchor studs.
2. Install the nuts (1) to the rear seat center belts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nuts to 42 N.m (31 lb ft).
3. Install the rear seat cushion.