Monte Carlo V6-3.8L SC VIN 1 (2004)
Trunk / Liftgate Switch: Service and Repair
REAR COMPARTMENT LID SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Release the LH instrument panel (IP) insulator tabs from the lower IP trim pad retainers for access.
2. Remove the LH fuse block access cover.
3. Remove the steering column opening filler panel screws.
4. Release the steering column opening filler panel retainers from the IP lower trim panel. Carefully lower the steering column opening filler panel
away from the IP lower trim panel.
5. Disconnect the electrical connector from the rear compartment release switch.
6. Remove the rear compartment release switch.
INSTALLATION PROCEDURE