Monte Carlo V6-3.8L SC VIN 1 (2004)
Hazard Warning Switch: Service and Repair
Hazard Warning Switch Replacement
HAZARD WARNING SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Apply the parking brake.
2. Using a small, flat-bladed tool, gently remove the bezel from the ignition lock cylinder.
3. If the vehicle is equipped with a column shift, position the transaxle shift control indicator to 1.
4. Adjust the steering wheel for access.
5. For the Impala, remove the right and the left access covers from the instrument panel (I/P) fuse block.
For the Monte Carlo, remove the left access cover from the I/P fuse block.
6. Remove the steering column filler.
7. For the Monte Carlo, open the instrument panel compartment door.
8. Remove the I/P cluster trim plate screws.
9. Start at the left side of the I/P cluster trim plate. Grasp the trim plate and carefully pull rearward. Disengage the I/P cluster trim plate in order to
easily access the hazard warning switch.
