Monte Carlo V6-3.8L SC VIN 1 (2004)
Power Steering Line/Hose: Service and Repair
Return Hose
Power Steering Return Hose Replacement (3.8L)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the power steering return hose (2) from the power steering gear (1).
4. Remove the return hose (2) from the clips on the power steering gear.
5. Remove the return hose (1) from the power steering pump.
6. Remove the return hose (1) from the hose retainers (3) on the cradle (4).
7. Disconnect the clips and the electrical harnesses from the return hose (1).
8. Remove the return hose (1) from the vehicle.
Installation Procedure