Monte Carlo V6-3.8L SC VIN 1 (2004)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement (3.8L)
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Remove the power steering pressure hose from the power steering pump.
5. Remove the power steering return hose from the power steering pump.
6. Remove the electrical connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
