Monte Carlo V6-3.8L SC VIN 1 (2004)
Stabilizer Bushing: Service and Repair
Front Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left and right side stabilizer shaft insulator bracket bolts.
3. Remove the left and right side stabilizer shaft insulator brackets.
4. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).
Installation Procedure
1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).