Monte Carlo V6-3.8L SC VIN 1 (2004)
Wiper Motor: Service and Repair
Wiper Motor Water Deflector Replacement
WIPER MOTOR WATER DEFLECTOR REPLACEMENT
TOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Clip Remover
REMOVAL PROCEDURE
1. Remove the air inlet grille Panel.
2. Using the J 38778 , remove the wiper motor water deflector push-in retainer.
3. Remove the wiper motor water deflector from the wiper drive system module.
INSTALLATION PROCEDURE
1. Position the wiper motor water deflector to the wiper drive system module.
2. Install the wiper motor water deflector push-in retainer.
3. Install the air inlet grille Panel.
