Monte Carlo V6-3.8L VIN K (1998)
Description
6. Insert the tether strap anchor bolt (7) through the anchor bracket (6) and the spacer (1).
7. Secure the tether strap anchor bolt (7) with the push-on nut (2).
NOTICE: Refer to Fastener Notice in Service Precautions.
8. Install the tether strap anchor bolt into the hole in the trim panel (3) and into the J-clip (5).
Tighten
Tighten the tether strap anchor bolt to 45 N.m (33 lb ft).