Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Cross-Member: Service and Repair
Crossmember, Trans Support, Lower Control Arms, STAB Shaft Repl
Removal Procedure
1. Raise and support the vehicle.
2. Remove the front tire and wheel assembly from the vehicle. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND
WHEELS.
3. Remove the following components from the crossmember:
^
The one bolt (13)
^
The four nuts (12, 14, 15, 16)
4. Support the front suspension crossmember with a jack.
5. Remove the following components:
^
The two suspension support brace nuts (4,6)
^
The suspension support brace (5)
