Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Trim Panel Replacement: Front Door - Installation Procedure
2. Install the inside door handle.
3. Connect the power door lock and/or the power window switch electrical connectors, if equipped.
4. Install the front window/door lock switch to the door trim panel (1), if equipped.
5. Install the window regulator handle snap ring to the handle.
6. Install the regulator handle to the door, if equipped.
7. Install the 2 armrest screws.
8. Install the trim cover to the front door armrest.
9. Connect the negative battery cable, if disconnected.
Rear Door
REMOVAL PROCEDURE
Trim Panel Replacement: Rear Door - Removal Procedure
1. Disconnect the negative battery cable, if equipped with power windows.
2. Unclip and remove the trim cover from the rear door armrest.
3 Remove the 2 screws from the armrest (1).
Trim Panel Replacement: Rear Door - Removal Procedure
4. Remove the regulator handle by using a cloth to pull off the snap ring, if equipped.