Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the wheel speed sensor (2) to the steering knuckle. Secure with 1 bolt.
^
Tighten the front wheel bolt to 7.8 Nm (69 in. lbs.).
2. Connect the pigtail harness (1) for the front wheel speed sensor to the vehicle. Secure with nut and clips.
^
Tighten the pigtail harness nuts to 5.4 Nm (48 in. lbs.).
3. Install the wheel speed sensor electrical connector (1).
4. Install the wheel-housing.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
5. Install the negative (-) battery cable.