Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
7. Remove 1 bolt and remove the wheel speed sensor (2) from suspension knuckle (1).
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the wheel speed sensor (2) to steering knuckle (1). Secure with 1 bolt.
^
Tighten the rear wheel speed sensor bolt to 7.8 Nm (69 in. lbs.).
2. Install the pigtail harness (1) for the rear wheel speed sensor to the vehicle. Secure with 2 nuts and 2 clips.
^
Tighten the nuts to 5.4 Nm (48 in. lbs.).
