Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Temperature Gauge: Service and Repair
Temperature Gage Replacement
REMOVAL PROCEDURE
1. Remove the instrument cluster retainer.
IMPORTANT: Do not remove the needle from the temperature gauge. There is no detent or flat spot on the shaft in order to indicate the correct
placement.
2. Remove the three screws (4) that secure the temperature gauge to the instrument cluster case.
3. Remove the temperature gauge (4) from the instrument cluster case
INSTALLATION PROCEDURE
1. Install the temperature gauge (4) to the instrument cluster case.