Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
4. Use the two nuts (1) in order to secure the thermostat cap.
^
Tighten the thermostat cap nuts to 9 Nm (80 inch lbs.).
5. Fill the radiator using approved coolant.
6. Start the engine.
7. Run the engine until the coolant is at operating temperature. The coolant is at operating temperature when the following conditions exist:
^
The hoses feel warm.
^
The coolant is flowing through the radiator.
8. Inspect for leaks in the cooling system.
9. Turn off the engine.
10. Install the radiator cap.
