Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
11. Remove the following fasteners from the right side engine mount:
^
The two nuts (3)
^
The four bolts (1)
12. Loosen the A/C receiver pinch clamp.
13. Lift the A/C receiver in order to access the right side engine mount.
14. Remove the right side engine mount.
15. Remove the cylinder head cover.
16. Set the number one piston to the top dead center position.
17. Align the camshaft timing sprockets.
18. Disconnect the power steering oil pressure switch connector.
19. Raise and properly support the vehicle.
20. Remove the right side lower engine splash shield.
21. Remove the two power steering pump through bolts and the nuts (1).
22. Remove the power steering pump from the mounting surface. Move the pump to the side.
