Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
14. Install the right side engine mounting bracket. Secure the bracket using three bolts.
^
Tighten the engine mounting bracket bolts to 54 Nm (40 ft. lbs.).
15. Install the drive belt tensioner. Secure the tensioner using one bolt and one nut.
^
Tighten the bolt to 69 Nm (51 ft. lbs.).
^
Tighten the nut to 29 Nm (21 ft. lbs.).
16. Raise the vehicle. Support the vehicle.
17. Install the crankshaft position sensor. Secure the sensor using one bolt (5).
^
Tighten the crankshaft position sensor bolt to 12 Nm (106 inch lbs.).
18. Install the crankshaft pulley. Secure the crankshaft pulley using one bolt.
^
Tighten the crankshaft pulley to 142 Nm (105 ft. lbs.).
19. Install the power steering pump.
20. Use the following fasteners in order to secure the power steering pump:
^
Two bolts (1)
^
Two nuts
-
Tighten the power steering pump bolts to 43 Nm (32 ft. lbs.).