Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
3. Install the two plastic retainers (2) that secure the floor panel carpet to the left I/P center support brace (1).
Floor Air Distribution Duct Replacement: LH Rear - Installation Procedure
4. Connect the three powertrain control module electrical connectors (2).
5. Install the powertrain control module (3) to the vehicle. Secure the module with the three bolts (1).
Tighten
Tighten the powertrain control module bolts to 15 N.m(11 lb ft).
Floor Air Distribution Duct Replacement: LH Rear - Installation Procedure
6. Install the plastic retainer (3) that secures the floor panel carpet to the bulkhead.
7. Install the front floor front console.
8. Install the footrest (5) to the vehicle. Secure the footrest with the two plastic retainers (4).
Floor Air Distribution Duct Replacement: LH Rear - Installation Procedure
9. Install the left front side door sill trim plate (1).
10. Install the left body hinge pillar trim panel.
