Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
2. Install the 6 heater case nuts.
Tighten
^
Tighten the nuts to 10 N.m (89 lb in).
3. Connect the rear heater ducts to the heater case.
4. Connect the blower motor resistor electrical connector (4).
5. Connect the blower motor electrical connector.
6. Install the I/P reinforcement.
7. Install the I/P assembly.
8. Install the heater hoses to the heater core.
9. Fill the cooling system.
10. Connect the negative battery cable.
