Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
High Pressure Safety Valve HVAC: Service and Repair
Compressor Pressure Relief Valve
Tool Required
J 41790 Compressor Holding Fixture
Removal Procedure
1. Install the compressor onto the J 41790.
2. Remove the pressure relief valve from the rear head of the compressor.
Installation Procedure
1. Clean the pressure relief valve seat area of the rear head.
2. Lubricate the O-ring of the new pressure relief valve with clean 525 viscosity refrigerant oil.
3. Install the new pressure relief valve into the compressor.
Tighten
Tighten the pressure relief valve to 9 N.m (80 lb in).
4. Remove the compressor from the J 41790.
