Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
^
Tighten the fluid filter screen bolts to 10 Nm (89 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the new transaxle fluid pan gasket and transaxle fluid pan to the transaxle. Secure with 18 bolts.
^
Tighten the transaxle fluid pan bolts to 4.9 Nm (43 inch lbs.).
3. Install the transaxle pan drain plug into the transaxle fluid pan.
^
Tighten the transaxle drain plug to 17 Nm (113 ft. lbs.).
4. Remove the drain pan from under the transaxle.
5. Install the left splash shield (1) to the vehicle. Secure the splash shield with 6 bolts.
^
Tighten the left splash shield bolts to 5 Nm (44 inch lbs.).
6. Lower the vehicle.
7. Refill the transaxle, as necessary. Refer to Transmission Fluid Checking Procedure.
