Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
6. Connect the following interior electrical connectors:
^
C1 to junction block 2
^
C2 to junction block 2
^
C2 to junction block 1
^
C200
^
C201
^
C202
^
C203
7. Install the knee bolster.
8. Install fuse and relay block 3 to the front support. Secure with the 2 bolts.
9. Install fuse and relay block 2 to the inner fender. Secure with the 1 bolt.
10. Install fuse and relay block 1 to the vehicle.
11. Connect each of the harness connectors.
12. Install the lower cover.
13. Install fuse and relay block 1 to the inner fender. Secure with the 2 bolts.
14. Connect the following underhood electrical connectors:
^
The SIR left front discriminating sensor
^
The brake pressure modulating valve (BPMV)
^
The brake fluid level switch
^
The left front wheel speed sensor
^
The right headlamp
^
The left headlamp
^
The left turn/park lamp
^
The right turn/park lamp
^
The A/C refrigerant pressure switch
^
The ambient air temperature sensor
^
The horn
^
The (main) radiator fan motor
^
The auxiliary radiator fan motor (with A/C)
^
The windshield washer pump
^
The generator B+ wire
^
G104
15. Install the air cleaner assembly.
16. Install the positive (+) battery cable to the fuse and relay block 1 feed cable. Install the nut.
17. Enable the SIR system.
18. Install the battery.
